1. How to submit my research paper? What’s the process of publication of my paper?
The journal receives submitted manuscripts via email only. Please submit your research paper in .doc or .pdf format to the submission email: ijeee@ejournal.net.
2. Can I submit an abstract?
The journal publishes full research papers. So only full paper submission should be considered for possible publication...[Read More]

Construction of Spin Coating Machine Controlled by Arm Processor for Physical Studies of PVA

N. Manikandan 1, B. Shanthi 1, 2, and S. Muruganand 1, 2
1. Bharathiar University, Coimbatore, India
2. Karpagam University, Coimbatore, India
Abstract—In this paper describes, construction and working of more efficient and compactable spin coating machine with a low power consumption comparing to that of current spin coating machine available in the market. The spin coating machine consists of stepper motor, syringe system, Dc brushless motor and Arm processor. The machine will coat thin film in a micro level thickness and its spinning speed and flow rate of the liquid has been controlled by the arm processor (LPC 11U24). Thickness of the film is determined by the flow rate and coating time of the spinning machine. Films with good uniformity for various thicknesses have been successfully prepared by using above spin coating machine, a capacitor sensor has been fabricated the above spin coating techniques and studied their physical properties
 
Index Terms—LPC 11U24, motor driver, PVA, spin coater

Cite: N. Manikandan, B. Shanthi, and S. Muruganand, "Construction of Spin Coating Machine Controlled by Arm Processor for Physical Studies of PVA," International Journal of Electronics and Electrical Engineering, Vol. 3, No. 4, pp. 318-322, August 2015. doi: 10.12720/ijeee.3.4.318-322
Copyright © 2012-2021 International Journal of Electronics and Electrical Engineering, All Rights Reserved