Controlling of a 3-Phased Asynchronous Motor over Profibus Network
C. Yılmaz 1, Y. Korkmaz 1, Y. Sönmez 2,
L. Bulut 2, and
M. Fatih Işık 3
1. Department of Electrical-Electronic Engineering, Faculty of Technology, Gazi University, Ankara, Turkey
2. Department of Electrical, Gazi University, Ankara, Turkey
3. Department of Electrical-Electronic Engineering, Faculty of Engineering, Hitit University, Çorum, Turkey
2. Department of Electrical, Gazi University, Ankara, Turkey
3. Department of Electrical-Electronic Engineering, Faculty of Engineering, Hitit University, Çorum, Turkey
Abstract—In this study, Profibus is used in remote-controlling of an Asynchronous Motor (AM) which is an industrial automation network. Therefore, the asynchronous motor torque and speed control are examined. In controlling the AM, the feedback data and control signals are conducted through a network. In this design, a real time control system has been used and thus, the desired working conditions can be remote-controlled. The used Profibus network provides a high-speed data transfer. This characteristic is important in applications that require sensitive control and the control mistakes stemming from network delay have been minimized. In this study moreover, the designed system has provided a control that is independent from the AM hardware.
Index Terms—asynchronous motor, industrial automation network, remote control, Profibus
Cite: C. Yılmaz, Y. Korkmaz, Y. Sönmez, L. Bulut, and M. Fatih Işık, "Controlling of a 3-Phased Asynchronous Motor over Profibus Network," International Journal of Electronics and Electrical Engineering, Vol. 4, No. 1, pp. 61-65, February 2016. doi: 10.18178/ijeee.4.1.61-65
Cite: C. Yılmaz, Y. Korkmaz, Y. Sönmez, L. Bulut, and M. Fatih Işık, "Controlling of a 3-Phased Asynchronous Motor over Profibus Network," International Journal of Electronics and Electrical Engineering, Vol. 4, No. 1, pp. 61-65, February 2016. doi: 10.18178/ijeee.4.1.61-65
Array